Samsung SPH-I325DLASPR - Manual (Page 51)

Device B
a
sics
Section 2A. Device Basics 37
Dialing From the Contacts List
1. Press Contacts (right softkey) to list the entries.
2. Use the thumbwheel to scroll through the list of
available contacts and select the entry you want to
call.
3. Press to dial the entry’s default phone number.
– or –
To dial another number assigned to the contact
entry, select the name and press
, and then
select a number and press .
Using Speed Dialing
You can store up to 89 numbers in your device’s speed
dial memory to make contacting friends and family as
easy as pressing a button or two. With this feature, you
can dial speed dial entries using one keypress for
locations 2–9 or two keypresses for locations 11–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣ Press and hold the appropriate key for
approximately two seconds.
Ⅲ If a number has been assigned to the current
number, the display confirms that the number has
been dialed when it shows “Calling...”.
Ⅲ If an application has been assigned to the
number, the corresponding application will
launch. Assigning an Application to a Speed Dial
Location.
To use Two-Touch Dialing for speed dial locations 11–99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that the number
has been dialed when it shows “Calling...”.
Note You can store a total of 89 numbers into speed dial
locations. Numbers 0, 1, and all digits ending in 0 (10,
20, 30, etc.) are reserved and cannot be overwritten.
Speed dial 1 is reserved for quick access to
Voicemail.
I325.book Page 37 Monday, October 27, 2008 12:20 PM