Samsung SPH-I325DLASPR - Manual (Page 45)

Device B
a
sics
Section 2A. Device Basics 31
Answering Calls
1. Make sure your device is on. (If your device is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call.
– or –
Press Answer ( left softkey ). (Depending on your
settings, you may also answer incoming calls by
pressing any number key. See “Call Options” on
page 52. for more information.)
Your device notifies you of incoming calls in the
following ways:
ⅷ The device rings or vibrates.
ⅷ The indicator light flashes.
ⅷ The backlight illuminates.
ⅷ The screen displays an incoming call message
screen.
If the incoming call is from a number stored in your
Contacts, the associated name is displayed. If the
incoming caller is not stored in your Contacts list, only
the phone number is displayed. The caller’s assigned
image may also be displayed, if available.
For all incoming calls, the
following options are
displayed. To select an
option, press the
corresponding softkey.
ⅷ Answer to answer the
incoming call. (This is the
same as pressing
.)
ⅷ Ignore to send the call to your voicemail box. (This is
the same as pressing .)
Tip To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see “Assigning
Speed Dial Numbers” on page 81.) (This feature will
not work when you are roaming off the Sprint
National Network; when roaming you must dial using
eleven digits [1 + the area code + the seven-digit
phone number.])
I325.book Page 31 Monday, October 27, 2008 12:20 PM