Media and tray – Samsung ML-4512ND-XAA User Manual
Page 41
Media and tray
41
2. Menu overview and basic setup
-
Curl: Must lie flat with no more than 13 mm of curl in any
direction.
-
Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
•
Make sure that there is no exposed adhesive material between
labels. Exposed areas can cause labels to peel off during printing,
which can cause paper jams. Exposed adhesive can also cause
damage to machine components.
•
Do not run a sheet of labels through the machine more than
once. The adhesive backing is designed for only a single pass
through the machine.
•
Do not use labels that are separating from the backing sheet or
are wrinkled, bubbled, or otherwise damaged.
Card stock/ Custom-sized paper
•
In the software application, set margins at least 6.4 mm (0.25
inches) away from the edges of the material.