Samsung ML-4512ND-XAA - Manual (Page 194)

68 3. Useful setting menus
Admin setup
Item Description
Password
Protect Sets the password to access the Admin Setup menu.
Select On to use this option and enter the password.
Change
Password Changes the machine’s password for accessing the
Admin Setup.
Maintenance
• Clean Fuser: Cleans the fuser by printing a sheet.
The printed sheet has toner debris on it.
• CLR Empty Msg.: Prevents the TonerLow Alert
message from appearing on the display.
• Supplies Info.: Allows you to check how many
pages are printed and how much toner is left in the
cartridge.
• TonerLow Alert: If toner in the cartridge has run
out, a message informing the user to change the
toner cartridge appears. You can set the option for
this message to appear or not.
• Ram Disk: Enables/disables RAM disk to manage
jobs. Depending on the installed optional memory
size, you can set the RAM disk size to between 32
and 64 MB. This option does not appear if you have
installed mass storage device.
• Density Calibration: You can manually calibrate
the toner density of machine for the best possible
print quality.
• Density Sensing: Automatically calculates the
reduced or worn out supplies like toner or machine
parts and uses this information to adjust the
density.
• Density Control: The machine automatically
calibrates the toner density of machine for the best
possible print quality. If you select Off, the machine
is calibrated by the factory default toner density.
Item Description