Samsung ML-4512ND-XAA - Manual (Page 253)

Operating system problems
127 6. Troubleshooting
Refer to the Linux User’s Guide that came with your computer for further information on Linux error messages.
4
Common PostScript problems
The following situations are PS language specific and may occur when several printer languages are used.
Problem Possible cause Solution
The PostScript file cannot
be printed. The PostScript driver may not be installed
correctly. • Install the PostScript driver (see "Software installation" on page 4).
• Print a configuration page and verify that the PS version is available
for printing.
• If the problem persists, contact a service representative.
Limit Check Error report
prints. The print job was too complex. You might need to reduce the complexity of the page or install more
memory.
A PostScript error page
prints. The print job may not be PostScript. Make sure that the print job is a PostScript job. Check to see whether
the software application expected a setup or PostScript header file to
be sent to the machine.
The optional tray is not
selected in the driver. The printer driver has not been
configured to recognize the optional tray. Open the PostScript driver properties, select the Device Options tab,
and set the tray option.