Samsung ML-4512ND-XAA - Manual (Page 165)

Wireless network setup
39 2. Using a network-connected machine
If the search has failed, you may check if the USB cable is
properly connected between the computer and machine,
and follow the instructions on the window.
7 After searching, the window shows the wireless network
devices. Select the name (SSID) of the access point you are
using and click Next.
If you cannot find the network name you want to choose, or
if you want to set the wireless configuration manually, click
Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of
access point you want (SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption
may or may not be used, depending on the need for data
security.
Shared Key: Authentication is used. A device that has a
proper WEP key can access the network.
WPA Personal or WPA2 Personal: Select this option to
authenticate the print server based on WPA Pre-Shared
Key. This uses a shared secret key (generally called Pre-
Shared Key pass phrase) which is manually configured on
the access point and each of its clients.
• Encryption: Select the encryption (None, WEP64,
WEP128, TKIP, AES, TKIP AES).
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network
key value.
• WEP Key Index: If you are using WEP Encryption, select
the appropriate WEP Key Index.