Samsung ML-4512ND-XAA - Manual (Page 181)

Wireless network setup
55 2. Using a network-connected machine
• The machine does not support a wireless network. Check the
machine's user's guide included on the software CD supplied
with your machine and prepare a wireless network machine.
► Connecting Failure - Not Found SSID
• The machine is unable to search the network name (SSID) you
have selected or entered. Check the network name (SSID) on your
access point and try connecting again.
• Your access point is not turned on. Turn on your access point.
► Connecting Failure - Invalid Security
• You configured security incorrectly. Check the configured
security on your access point and machine.
► Connecting Failure - General Connection Error
• Your computer is not receiving a signal from your machine.
Check the USB cable and your machine’s power.
► Connecting Failure - Connected Wired Network
• Your machine is connected with a wired network cable. Remove
the wired network cable from your machine.
► PC Connection Error
• The configured network address is unable to connect between
your computer and machine.
- For a DHCP network environment
The receives the IP address automatically (DHCP) when
computer is configured to DHCP.
- For a Static network environment
The machine uses the static address when the computer is
configured to static address.
For example:
If the computer’s network information is as shown below:
▪ IP address: 169.254.133.42