Flytec 6020 * - Manual (Page 8)

Operating Manual Flytec 6020
Final approach screen
Number of Satellites
received by GPS
This line points to goal
(Bearing)
Charge state of battery 1 and
battery 2
Exit assistance and
Track recommendation
Current page User defined field
Deviation between required L/D
to Goal and best glide of the aircraft.
1 graduation = 0.5 glide ratio.
Example best glide 8
Required glide ratio to Goal 5.7
Analogue Vario
Angle between Track and Bearing
1graduation = 10° example 22°
Point of best glide
User defined field User defined field
Function of F1 key Function of F2 key
Information lines
The final approach screen serves as an assistance for the final glide. It is less suitable for
the normal flight. It will normally be activated in the last thermal before the goal.
The horizontal scale shows the deviation between current track and bearing (direction to
the goal). 1 graduation line is 10°, between 2 large lines there are 20°. The vertical scale
shows the deviation between the required lift/drag ratio to the goal and the ratio of best
glide of the aircraft, such as it is adjusted in the Basic Settings. One graduation line
corresponds to 0,5 lift/drag ratio. There is one lift/drag ratio between 2 large lines.
The example shows an aircraft with lift/drag ratio 8. The required L/D ratio to goal is 5.7.
The aircraft symbol is positioned by 2.3 units above the point of best glide.
- 8 -