Flytec 6020 * - Manual (Page 42)

Operating Manual Flytec 6020
4.3.1 Fightinstrument Option
All settings can be set or changed comfortably with Flychart 4.52
Waypoints
Airspace
User settings
and Instrument
settings
4.3.2 Waypoints
and Routes
Within the same Flychart Menu the Waypoints and Routes may be transferred to the
instrument. Flychart is also appropriate to import waypoint files from SeeYou or CompeGPS
or Garmin for transfer to the instrument.
4.3.3 Airspace
(CTR)
The same principle applies on Airspace. For this purpose please activate button „Airspace“.
4.4 Transferring new software to the 6020-GPS
As is the case with many other present-day instruments, there is also the possibility to
up-date the software version (Firmware). Hereby future requirements presented by pilots
or new Competition regulations may be rapidly implemented. The manufacturer Flytec
shall post from time to time program up-dates of the 6020-GPS firmware on its Internet
homepage, which can be downloaded by the user free of charge for storage and
subsequent transfer to the 6020-GPS.
In order to be able to write into the 6020-GPS flash memory with a PC, the program
“Flasher.exe” is required, which is available in zipped format file under the name of
“Flasher.zip”. In addition, also the intrinsic firmware to be uploaded has to be obtained from
the homepage. Its name is e.g. “6020v325.moc” (approx. 500 KB) which is equivalent to
version 3.25.
We recommend to save all the related files in one single subdirectory (e.g. C:\Programs\
FlytecFlasher\).
- 42 -