Horner APG XL6 OCS HEXT351C115 - Manual (Page 3)

MAN0887-05-EN Specifications / Installation
__________________________________________________________________________________________________________________________________________________________________
3/2/2010 Page 3 of 8 #1037
4 Ports and Connectors
To Remove I/O Cover:
Unscrew 4 screws located on the
cover.
Remove cover.
CAUTION: Do not over tighten
screws when replacing the back
cover.
I/O Jumpers:
I/O Jumpers (JP) are located internally.
To access, remove I/O cover of unit.
Wiring Connectors (J1 / J2 / J3) and
I/O Jumpers (JP1 / JP2 / JP3 / JP4)
are described in the Wiring and
Jumpers section of this document.
USBA: For flash drive connectivity
USBB: For network communication and
programming of OCS
Removable Media:
Uses Removable Memory for data
logging, screen captures, program
loading and recipes. Horner Part No.:
HE-MC1
Serial Communications: MJ1/MJ2:
(RS-232 / RS-485) Use for Cscape
programming and Application-Defined
Communications.
Ethernet: Used for Cscape
programming and Application-Defined
Communications.