Horner APG XL6 OCS HE-XL1E14 - Manual (Page 3)

MAN0902-01-EN Specifications / Installation
__________________________________________________________________________________________________________________________________________________________________
3/26/2009 Page 3 of 7 ECN # 956
4
Ports and Connectors To Remove I/O Cover:
Unscrew 4 screws located on the
cover.
Remove cover.
CAUTION: Do not over tighten
screws when replacing the back
cover.
I/O Jumpers:
I/O Jumpers (JP) are located internally.
To access, remove I/O cover of unit.
Wiring Connectors (J1 / J2) and
I/O Jumpers (JP1 and JP2) are
described in the Wiring and Jumpers
section of this document.
Memory Slot:
Uses Removable Memory for data
logging, screen captures, program
loading and recipes.
Horner Part No.: HE-MC1
Serial Communications:
MJ1: (RS-232 / RS-485) Used for
Cscape programming and Application-
Defined Communications.
MJ2: (RS-232 / RS-485) Used for
Application-Defined Communications.
Ethernet: Used for Cscape
programming and Application-Defined
Communications.