Model 5 i/o – Horner APG XL4 OCS User Manual
Page 6
MAN0963-07EN
Specifications / Installation
August 23, 2012
Specifications / Installation
Page 6 of 6
Model 5 I/O
The XL4 model 5 (HE-XC1E5) features 12 DC Inputs, 12 DC outputs, with high performance, highly configurable Analog
Inputs (2) and Analog Outputs (2). , The DC Inputs are 12/24Vdc compatible, and can be jumpered for Positive Logic
(sinking), or Negative Logic (sourcing). Four of the inputs (H1-H4) can be used for high-speed functions up to 500kHz.
The 12/24VDC Outputs feature Electronic Short Circuit protection, and support currents up to 0.5A per point, and 4A total.
Two of the DC Outputs can be used for high speed functions (PWM or PTO). The output frequency is limited by the
switching capability of the output drivers (about 10kHz), although an optional accessory (HE-XHSQ) can be added to
provide parallel output drivers supporting frequencies up to 200kHz.
The two high resolution Analog Inputs can be configured for 4-20mA, 0-10V, or 0-100mV at 14-bit resolution. They also
can be configured for 16-bit temperature measurement – supporting Thermocouples or RTDs with 0.05
°
C resolution. The
Analog Outputs are sourcing, and can be configured for 4-20mA or 0-10V at 14-bit resolution. Each Analog Input or
Output channel can be configured independently for maximum flexibility.
Thermocouple In
T1+
T1-
RTD In
T1+
T1-
0V
mV In
T1+
T1-
0V
100mV+
100mV-
Note: Be sure to wire 0 V
to V1 as shown for proper
operation.
LOOP PWR
20mA
MA1
V1
0V
20 mA Analog In
0 – 10 V Analog In
0-10VDC
MA1
V1
0V
NC
Note:
Loop Power requirements are determined by the transmitter specification.
J1
(Orange)
Name
I1
IN1
I2
IN2
I3
IN3
I4
IN4
I5
IN5
I6
IN6
I7
IN7
I8
IN8
H1
HSC1 / IN9
H2
HSC2 / IN10
H3
HSC3 / IN11
H4
HSC4 / IN12
NC
No Connect
NC
No Connect
0V
Common
J2
(Black)
Name
0V
Common
V+*
Output Power
NC
No Connect
Q12
OUT12
Q11
OUT11
Q10
OUT10
Q9
OUT9
Q8
OUT8
Q7
OUT7
Q6
OUT6
Q5
OUT5
Q4
OUT4
Q3
OUT3
Q2
OUT2 / PWM2
Q1
OUT1 / PWM1
Q1
Q2
Q3
Q4
Q9
Q10
Q11
Q12
Q5
Q6
Q7
Q8
V+
0V
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
10 - 30VDC
NC
001XLE008
J2 Black
Positive Logic
Digital Outputs
J3
(Orange)
Name
T1+
Tc (1 +) or RTD (1+) or
100mV (1+)
T1-
Tc (1-) or RTD (1-) or
100mV (1-)
T2+
Tc (2+) or RTD (2+) or
100mV (2+)
T2-
Tc (2-) or RTD (2-) or
100mV (2-)
AQ1
10V or 20mA Out (1)
AQ2
10V or 20mA Out (2)
0V
Common
MA1
0-20mA In (1)
V1
0-10V In (1)
0V
Common
MA2
0-20mA In (2)
V2
0-10V In (2)
0V
Common
0 -10 V Analog Out
AQ1
0V
10VDC
4 - 20 mA Analog Out
AQ1
0V
20mA
J1
J2
J3
JP2
JP1
JP3
JP4
001XLE030
JP2
JP3
T/C/100mV
T1
T2
JP2
JP3
RTD (PT100)
T1
T2
CURRENT
(20mA)
VOLTAGE
(10V)
JP4
ANALOG OUTPUT SETTING
VOLTAGE OR CURRENT
AQ2
AQ1
AQ2
AQ1
Default
Negative Logic
Positive Logic
JP1 Digital DC Inputs
Default
JP2
JP3
10V/20mA
MA1/V1
MA2/V2
Default
JP2 & JP3
ANALOG INPUT SETTING
Location of I/O jumpers (JP1-JP4) and
wiring connectors (J1-J4)
with back cover removed.
Jumper Setting Details
J1 Orange
Positive Logic
Digital Inputs