MagTek InSpec 9000 - Manual (Page 39)

29
SECTION 4. GRAPHICS PRESENTATIONS
The charts and graphs shown in this section represent only a part of all the charts and graphs that
can be produced by the program; however, these graphs are representative of the others.
The charts and graphs are organized in the order in which they are most likely to appear. The
first bar chart, “ISO Parameters” is the first chart to appear after a card is inserted in the Tester.
From this chart the operator may select the graph or “Card Profiles” from the buttons under the
bars, such as Bit Size under Track 2. When any of the numerical buttons are pressed, the
numerical values of the bars will be shown for all three tracks. If the cursor is pointed to any
value on the numerical screen, the ISO limits for that value will appear at the bottom of the
screen. The information encoded on all three tracks will also appear on the screen. If print is
selected, all of the values will be printed out with all the ISO limits and the measurement
uncertainty of the Tester. The Start Sentinel Location screen lists values in inches and
millimeters.
The next three bar graphs are performance charts used to view trends on an individual card basis
or a daily basis.
The last charts are Card Database Search Parameters and Card Database Records. Much of the
information in these charts will be used by maintenance personnel.