Figure 5-9, the three top cover screws, Chapter five – Ask Proxima 9100 User Manual
Page 79
5-8
Chapter Five
4 Locate the screws holding the main top cover in place (see Figure 5-9).
Remove the three screws and lift up on the screw mountings until the
cover is loose. Gently pull the cover up and to the left of the projector
until it releases.
OVER
TEMP
VOLUME
SOURCE
FIT -T
O-VIEW
PO
WER
CLEAR
SETUP
MENU
REPL LAMP
Figure 5-9, The three top cover screws
5 While still holding the cover, remove the ribbon cable on the underside
of the control panel. Place the cover on a soft cloth.
Caution! Never touch the LCD panel located underneath the top-cover
projection lens. Use caution when changing the filters.
See also other documents in the category Ask Proxima Projectors:
- Ultralight LS2 (1 page)
- C130 (50 pages)
- DP2000s (2 pages)
- DP2800 (83 pages)
- IN42 (49 pages)
- DP6810 (1 page)
- ASK M3 (32 pages)
- DP9240 (1 page)
- DP6105 (2 pages)
- C410/C420 (50 pages)
- + DP6850 (1 page)
- DP6150 (1 page)
- C420 (DP8200X) (1 page)
- C90 (11 pages)
- DP2300 (71 pages)
- 700 (29 pages)
- C440 (13 pages)
- M5 (1 page)
- Pro AV 9410 (2 pages)
- Pro AV 9310 (2 pages)
- Ultralight SV1 (19 pages)
- DP5610 (1 page)
- C105 (DP6155) (1 page)
- DP9250 (52 pages)
- Campus 300 (2 pages)
- Pro AV 9350 (2 pages)
- C300HB (3 pages)
- DP6100 (4 pages)
- DP5600 (45 pages)
- Pro AV 9300 (2 pages)
- DP9260 (1 page)
- C5 (1 page)
- DP5800 (5 pages)
- C40 (DP2000s) (3 pages)
- C420 (1 page)
- C1 (1 page)
- 21 (1 page)
- C160 (1 page)
- Ultralight DS2 (1 page)
- Impression 860 (46 pages)
- C440/C450 (61 pages)
- Ultralight LS1 (49 pages)
- A9+ (8 pages)
- Pro AV 9310L (49 pages)