Ask Proxima 9100 - Manual (Page 20)

Setting Up Your Projector 1-7
CONNECTING THE PROJECTOR TO YOUR COMPUTER
Take a moment to review the projector’s connector panel.
Audio 1 In
Audio Out
MIC Cyclops
Computer
Audio In
Audio 2 In
Video 1 S-Video 1
S-Video 2 Video 2
Computer In Computer Out VGA Out
Figure 1-10, The connector panel
PORT CONNECTS TO... ...WITH THIS CABLE
AUDIO 1 In Left and right ports connect to Composite audio/video cable
AUDIO 2 In a video source, brings audio (C497-6).
into the projector.
VIDEO 1 Connects the projector to a Composite audio/video cable
VIDEO 2 video camera, laserdisc player, (C497-6).
television, or a VCR
(NTSC/ PAL/SECAM source)
to bring video from these
sources into the projector.
S-Video-1 Connects the projector to an S-Video cable (C466-6).
S-VIdeo-2 S-Video source to bring video
into the projector.
COMPUTER Left and right ports connect to Computer audio cable (C498-6) .
AUDIO IN the computer, brings audio
into the projector.
AUDIO OUT Connects to external speakers Audio cable.
or an external sound system to
send stereo audio out.
CYCLOPS* Connects to the computer to RS-232 cable (PC C936-6),
use the Cyclops F/X software (MAC C470-6), (Workstation C902-6
or the optional Cyclops and C903-6).
interactive pointer system.
* Instructions for connecting to this port are also included in the Cyclops
User’s Guide.