Vaisala vLog 4.5 - Manual (Page 70)

Batch Transfer of Logger Data to the PC (vLog VL)
64 © 2011 Vaisala Canada Inc
Setting System Date and Time
To set the PC’s date and time using the Windows operating
system:
1
Select Start | Control Panel , and then double-click Date/
Time .
2 Reset the time to the correct values.
3 Click OK .
Batch Transfer of Logger Data to the PC
(vLog VL)
To transfer the information stored in multiple loggers to the PC
in a batch:
1
Connect the data loggers to the PC (see page 16).
2 Ensure that the COM ports are configured (see page 25).
3 Ensure that you have write permission to the folder on
the PC where you are going to save the transferred files.
4 Select Logger | Batch Transfer . The Batch Transfer
Wizard window opens.
5 Confirm that the current date and time shown in the
window are correct. If the date and time are not correct,
use the Windows Control Panel to update the date and
time (see page 64).