Vaisala vLog 4.5 - Manual (Page 46)

Configuring Loggers
40 © 2011 Vaisala Canada Inc
different steps. In general, configure the logger’s typical
units and range to reflect the units and range you want to
display.
3 To set up a DC Current channel:
a Ensure the Channel is enabled by selecting the Chan-
nel Enabled check box.
b If applicable, enter a new channel description.
c From Input Signal , specify the range for your transduc-
er output.
d Under Display Units , specify the range and units to dis-
play instead of the input signal range. For example, psi
instead of mA.
e To set warmup time and save transducer battery life,
see “Configuring Warm Up Time” on page 42.