Vaisala vLog 4.5 - Manual (Page 40)

Configuring Loggers
34 © 2011 Vaisala Canada Inc
must use the Clear Logger setting to make the
necessary changes.
• Clear Logger - This is the default setting if the logger
memory is full. The Clear Logger setting allows you to
modify both Start and Stop mode parameters and
change Sample Interval values. Choosing this setting
results in the logger’s memory being cleared following
completion of the setup changes. You will lose data
unless you transfer it first. If you are in doubt as to
whether the information on the logger is still valuable,
first make a copy of the data using
Logger | Transfer ,
and then make the necessary logger setup changes.
When you choose Clear logger, the Start Mode and Stop Mode
radio buttons become available.
Setting the Start Mode
The Start Mode enables you to choose when the logger starts
taking samples.
To set the Start Mode:
1
Under Clear Mode , select the Clear logger option.