Vaisala HMP110 - Manual (Page 37)

Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 35
List of Serial Commands
All commands can be issued either in uppercase or lowercase. In the
command examples, the keyboard input by the user is in bold type.
The notation refers to pressing the carriage return (Enter) key on
your computer keyboard. Enter a to clear the command buffer
before starting to enter commands.
Table 6 List of Serial Commands
Command Description
? Output information about the device
ADJD View the adjustment date
AMODE View or set the analog output mode
AOVER [ON/OFF] Allow analog outputs to exceed their range
10%
ASEL Set analog output parameters and scaling
CDATE View the calibration date
CODE View the order code of the probe
CRH Calibrate and adjust RH measurement
CRHCLR Clear adjustment of RH measurement
CT Calibrate and adjust T measurement
CTCLR Clear adjustment of T measurement
CTEXT View the calibration information field
ERRS List present probe errors
FILT [0.001 … 1] Set the result filtering
FRESTORE Restore factory settings
HELP List available commands
INTV [0 ... 255 S/MIN/H] Set the continuous output interval (for RUN
mode)
L Displays user adjustment parameters
R Start the continuous outputting
RESET Reset the probe
S Stop the continuous outputting
SDELAY [0 … 255] View or set serial line answer minimum
delay
SEND [0 ... 255] Output the reading once
SNUM View the serial number of the probe
UNIT Select metric or non-metric output units
VERS View software version of the probe