Mounting the hmp63 and hmp113 probes – Vaisala HMP110 User Manual
Page 27
Chapter 3 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 25
Mounting the HMP63 and HMP113 Probes
HMP63 and HMP113 probes do not have a thread on the probe body.
For a convenient installation, use the optional installation accessories:
- Use the probe mounting clamp to hold the probe on a wall.
- Use the probe mounting flange to hold the probe in a through-wall
installation.
- If you are using the probe with a HMT120, HMT130, or HM40 hand-
held meter, use the plastic locking bushing.
For information on these accessories, see section Installation Accessories
(Optional) on page 15.
NOTE
Avoid placing the probe in a place where condensation can run onto the
sensor.