Vaisala HMP110 - Manual (Page 17)

Chapter 2 __________________________________________________________ Product Overview
VAISALA _______________________________________________________________________ 15
Installation Accessories (Optional)
For order codes, see section Options and Accessories on page 68.
Probe Mounting Clamp
The optional mounting clamp makes it easy to install the probe on the
wall of the measurement environment. The probe can be detached for
calibration simply by loosening the lower screw.
1001-138
Figure 4 Probe Mounting Clamp in Use
The probe mounting clamp is delivered in two parts that must be
connected when it is used:
1. Align the slots on the clamp parts as shown in Figure 5 below.
1209-001
Figure 5 Aligning Mounting Clamp Slots