Outback Power Systems VFX Series International Programming Manual - Manual (Page 41)

40
ADV/FX/STACK--------P02
stack 1-2ph Master
phase
DOWN INC DEC PORT
ADV/FX/STACK---------P03
stack 3ph Slave
phase
DOWN INC DEC PORT
AUXILIARY (AUX) FUNCTIONS
The AUX output provides a 12VDC, 0.7ADC max output at the AUX terminals to control DC or AC ex-
ternal loads. Typical loads include signaling a generator system to start, sending a fault alarm signal, or
running a small fan to cool the FX.
Press the soft key.
NOTE: Pressing and holding the fi rst two soft keys
at the same time will always bring up the Main
Menu screen.
Push any soft key on the ADV/SETTINGS/
WARNING screen and go to the ADV/PASSWORD
screen.
MAIN--------------------------
12:12:16A
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could adversely aff ect
system performance
PRESS INC FIVE TIMES
ADV/FX/STACK--------P02
3ph Slave
DOWN INC DEC PORT
PRESS INC FIVE TIMES
PRESS DOWN THREE TIMES
ADV/FX/STACK--------P03
stack 1-2ph Master
phase
DOWN INC DEC PORT