Outback Power Systems VFX Series International Programming Manual - Manual (Page 28)

27
ADV
choose device:
FX CC DC MATE
ADV/FX/PAGE 1-----------------
choose category:
ADV INV CHGR PG2
On the ADV/FX/PAGE 1 screen, press the
soft key and go to the ADV/FX/PAGE2 screen.
In the ADV menu, press the soft key.
ADV/FX/PG2---------------------
choose category:
PG1 GRID GEN PG3
Press the soft key which leads to the
ADV/FX/PAGE3 screen.
ADV/FX/PAGE3------------------
choose category:
PG2 AUX STACK PG4
On the ADV/FX/PAGE3 screen, press the
soft key.