DAVIS FMS DriveRight Getting Started Guide (8186) - Manual (Page 24)

20
6. Click Browse to select the old Borland tables directory. (The Borland tables are
likely in C:\Program Files\DriveRight Software\tables.)
7. Click Convert to start the conversion.
After the data is converted you will see a success message. At this point all of
your 2.x data has been converted into the new DriveRight FMS database
format.
Note: The conversion process may take a long time depending on the size of your 2.x
database. While you can interrupt the conversion at any time by clicking the stop button,
this is not recommended.
8. Be sure to check the data conversion by opening FMS and viewing various
tables using the Database Menu.
Contacting Davis Technical Support
If you have questions about the software, or encounter problems installing or using
the software, please contact Davis Technical Support. Most questions can be
answered on the phone.
Note: Sorry, we are unable to accept collect calls.
(510) 732-7814 – Monday through Friday, 7:00 a.m. to 5:30 p.m. Pacific Time.
(510) 670-0589 – Fax to Technical Support.
[email protected] – E-mail to Technical Support.
[email protected] – E-mail to Davis Instruments.
www.davisnet.com – Product documentation is available on the DriveRight
Support section of our web site. Watch for FAQs and other updates.