DAVIS FMS DriveRight Getting Started Guide (8186) - Manual (Page 10)

6
5. Select a directory or destination folder for storing DriveRight FMS or accept
the default destination folder and click Next.
6. The SmartCard Desktop Reader USB Driver dialog box displays.
If you are using a SmartCard Desktop Reader in conjunction with FMS, check
the appropriate Smart Card Reader driver and click Next.
If you do not have the SmartCard Desktop Reader at this time or have installed
the driver before, deselect the driver and click Next.
7. If you have selected the Athena driver, choose 32-bit or 64-bit version in the
next screen.
8. Click Next. The DriveRight FMS Installation Progress dialog box displays.
9. If you have selected SmartCard USB drivers to install, the Information dialog
box displays, alerting you that the driver is being installed.
10.If you have connected your SmartCard Desktop Reader, disconnect it and click
OK. See “Installing USB Drivers for the SmartCard Desktop Reader” on
page 7.
11.FMS Installation is completed. Click Finish to exit the DriveRight setup.