DAVIS FMS DriveRight Getting Started Guide (8186) User Manual
Page 12
8
3. Click Install to continue.
4. Click Finish once the installation is complete.
5. Once the installation is complete, Athena ASEDriveIIIe USB should display in
the Device Manager under the Smart card readers list.
FMS can now properly recognize the SmartCard Desktop Reader and the
correct driver displays in the SmartCard Reader Setup dialog box.
Follow these steps for ACS Drivers
Note: The following installation was completed in a Windows XP operating system. The pro-
cess may vary depending on your operating system. ACS SmartCard Driver may not
work properly on Windows Vista and later.
1. Follow the Installation Wizard prompts to install the ACS USB drivers.
2. When prompted, plug in the SmartCard Desktop Reader to an available USB
Port and click OK.