PowerTap Pro - Manual (Page 31)

31
TEST MODE
· Starts when the 't" is selected from the setup menu.
· Lights the interval memory mode "M" icon and small number to left of it.
· Mode scrolls through the different test modes as shown by the number.
· Select generally performs the numbered item unless there is to be other inputs are being tested for.
· Pressing Mode and Select together for longer than 2 seconds returns to standard operation
0 - Model and version.
Displays the model on the middle line and version number on the bottom line.
1 - LCD test.
When Select is pressed all the LCD segments are displayed. Press Select again to return to the normal screen.
2 - Receiver test signal. (Note the receive icon is displayed.)
The middle line display flashes "88" with each blip of data from the receiver whether valid or not.
3 - Heart rate signal test. (Note the heart icon is displayed.)
The middle line display flashes "88" with each heart rate blip received.
4 - Bike computer wheel magnet sense detect. (Note the MI KM icons are displayed.)
The middle line display flashes "88" with each sensing of the wheel magnet next to the receiver.