PowerTap Pro - Manual (Page 20)

20
POWERTAP PRO INTERVAL MODE
Pro Interval Mode
The Powertap Pro Interval mode functions differently than the previous Powertap computers. It works as a lap marker, and is essentially always on. To begin the first
interval, or advance the interval, simply press both buttons down simultaneously from any location or mode in the display. “INT” and the new interval # will briefly
appear, before disaapearing again to the background. To view interval specific information (duration, distance, averages, etc) simply hold down the mode button
for two seconds. This brings interval mode to the foreground. “INT” and the interval number will constitute a fourth line in the display (see picture at
right). When you wish to relegate the interval information to the background again, simply depress the mode button for two seconds.
Pro Interval Memory Mode
To access stored interval information selcet “INT” by pushing mode until “INT” blinks. Then hold select for 2 seconds until M appears next to the inter-
val number indicating you are now viewing interval information. Push select to advance to the interval you wish to view and push mode to select the
information you wish to view. (Ave. watts, cadence, etc.)To exit Interval Memory Mode hold mode for 2 seconds. Note that recovery periods as well as
work periods are displayed in memory mode.
Pro Interval Shortcut
To quickly mark intervals simply push both buttons simultaneously from either trip or interval mode. If in trip mode “INT” will briefly appear indicating
you have marked an interval and which number interval you are on.
watts
speed int
multi