PowerTap Pro - Manual (Page 21)

21
1. Push either button to activate the computer.
(Note: the version of firmware is displayed in the lower
corner-shown below)
PRO
2.0
POWERTAP PRO COMPUTER SETUP
Set
E
1 2 3 4
t
d
Press select to choose the desired set up and press mode to begin set up.
E = exit, return to ride mode
d = restore default settings
T= Test Mode
Setup modes 1-4 see following pages.
Note: computer illustrations on the following pages display the factory default settings.
2. To enter the set up main menu hold down both
buttons until the main menu is displayed
Main Menu