PowerTap Pro - Manual (Page 15)

15
POWERTAP STANDARD COMPUTER SET UP
Press select button
to change digits.
Press mode button
to advance.
Std
p
t
12:00
Std
03
Std
r
e
c
5
Press select button to
select year, month
and date.
Press mode button to
advance. Press select button to
select the storage
rate.(1,2,5,10,or
30seconds.)
Press mode button to
save.
0 1 - 0 1
c
Year
Day
Month
Recording Settings
(seconds)
1 2 5 10 30
Max. Recording
Time (hrs)
7.5 15 30 60 180
Run Time : Different storage rates yield
different amounts of total storage time.
Refer to the chart on left to select the most
appropriate storage rate.
* For quick exit and saving of all changed set up features in Setup 1 only, hold both buttons.
Std
1
Std
1
Press select button to
change digits.
Press mode button to
advance to next digit.
Refer to wheel circum-
ference guide for
correct tire circumfer-
ence. A roll out meas-
urement (mm) of the
rear wheel will give
greatest accuracy.
Press select button to
select English or Metric
units.
Press mode button to
save. Press select button to
select starting Odometer
reading.
Press mode button to
save.
Note:Odometer settings
are saved during battery
changes.
CI
r
Std
1
0 0 0 0 0 2096
M I
OD
o
* See wheel circumferences on page23.