PowerTap PowerCal 2012 User Manual

Powercal

PowerCal

(Models 7150 & 7151)

ABOUT POWERCAL
PowerCal is a unique chest strap that is both a heart rate monitor and a power meter. PowerCal measures your heart rate and, using an
algorithm, calculates your power output. PowerCal can be paired to any ANT+ device or watch that displays power and heart rate such as a
CycleOps Joule.

PACKAGE CONTENTS
1x PowerCal (CR2032 battery installed)
1x User Guide
1x Speed Sensor (model 7151 only)

Mounting hardware for sensors
(model 7151 only)

1.1: For best results lightly moisten the electrodes where contact is made with skin.
Ensure both snaps on the strap are securely connected to the sensor.

1.2: Position the

PowerCal on your torso as shown. When a heart rate signal is detected, the PowerCal
wakes up and immediately begins transmitting both heart rate and power information.

PUT ON THE POWERCAL

Pairing is the process of connecting PowerCal to your desired ANT+ compaitble display
device. Please consult the user guide that came with your ANT+ device for the pairing of
power

2.1 and heart rate 2.2.

PAIR Joule/ANT+ device to PowerCal.

1.1

Back of PowerCal

Electrodes

1.2

Joule or ANT+
Power display
capbable device

PAIR
POWER

Joule or ANT+
Power display
capbable device

PAIR
HR

2.1

2.2

GETTING STARTED

TECHNICAL SPECIFICATIONS

• Signal Transmission: 2.4 GHz
• Operational Temperature: 0-40C/32-103F
• Battery Type: CR2032
• Battery Life: 600 Operational Hours