PowerTap SLC+ User Guide - Manual (Page 28)

COMPUTER SETUP 3
This setup menu includes: zero readings for power, speed, and cadence. NOTE: You are
unable to move back to a previously viewed setting. You must restart setup 3 to make correc-
tions. NOTE: These settings are useful for determining you average power reading when ped-
aling only and do not effect the data that is stored for download.
1) From the computer setup main menu press [SELECT] and scroll until
the number three (3) is flashing and press [MODE] to enter setup mode.
2) Press [SELECT] to toggle between yes and no for zeros included in
average of watts. Press [MODE] to save.
3) Press [SELECT] to toggle between yes and no for zeros included in
average of speed. Press [MODE] to save.
4) Press [SELECT] to toggle between yes and no for zeros included in
average of cadence. Press [MODE] to save.
5) Press [SELECT] to toggle between yes and no for auto-zero function.
Normally leave at yes. NOTE: Auto-zero ‘NO’ is used for track bike use
where large negative torque may be present. Hub modification to fixed
gear is necessary.
28
PRO
3
0’ s
Y E S
AV WATTS
PRO
0’ s
AV MI
Y E S
PRO
3
c av
0’ s
Y E S
PRO
3
t
Y E S
Set
E
1 2 3 4 5
t
d