PowerTap SLC+ User Guide - Manual (Page 16)

SPEED FUNCTION
The middle level of the main display shows current, max, and average speed readings.
1) Press [MODE] to scroll the cursor to the middle line of the main display.
2) Press [SELECT] to toggle through the speed function options.
Current Speed
Speed is displayed in either miles per hour (MI) or kilometers per hour (KM) up
to 59 mi/hr or 95 km/hr in 0.1 mi/hr or km/hr increments. Current speed read-
ings are displayed when only “MI” or “KM” appears below the middle line. (FIG-
URE 13)
Maximum Speed
Either “MI” or “KM” and “MX” displayed simultaneously indicate the highest
recorded speed since the last time data was cleared in trip mode or the select-
ed interval in interval mode. (FIGURE 14)
Average Speed
Either “MI” or “KM” and “AVG” displayed simultaneously indicate the average
recorded speed since the last time data was cleared in trip mode or the select-
ed interval in interval mode. (FIGURE 15)
16
365
25
58.I0
WATTS
3
MI
D
365
33
58.I0
WATTS
7
MX MI
D
365
20
58.I0
3
AV MI
D
WATTS
FIGURE 13
FIGURE 14
FIGURE 15