PowerTap SLC+ User Guide - Manual (Page 25)

5) Press [SELECT] to toggle through digit values to set minutes in time
of day. Press [MODE] to save.
6) Press [SELECT] to toggle through digit values to set year, month, and
date. Press [MODE] to save.
7) Press [SELECT] to toggle through storage rate values (1, 2 seconds).
Press [MODE] to save. NOTE: Different storage rates yield different
amounts of total storage time. Changes to the storage rate do not effect
display information. Refer to TABLE 3 for appropriate storage rate.
TABLE 3 - PowerTap Storage Rate
8) Press [SELECT] to toggle through digit values to set the wheel circum-
ference. Press [MODE] to save. Refer to TABLE 4 for common tire infor-
mation. NOTE: For the most accurate reading perform a roll out meas-
urement (mm) of the rear wheel.
25
Std
03
0 1 - 0 1
c
Year
Day Month
Std
r
e
c
1
Std
1
CI r
2096
Recording Rate (sec) SLC+, SL+, Pro+ and 2.4+ (hrs) Elite + (hrs)
1 sec. 12 6
2 sec. 24 12