PowerTap SLC+ User Guide - Manual (Page 24)

COMPUTER SETUP 1
This setup menu includes: time of day, date, storage rate, wheel circumference, units of meas-
ure, odometer and lactic threshold. NOTE: You are unable to move back to previously viewed
settings. You must restart setup 1 to make corrections. You may hold [MODE] and [SELECT] to
save and exit setup.
1) From the computer setup main menu press [SELECT] and scroll until
the number one (1) is flashing. Press [MODE] to enter setup mode.
2) Press [SELECT] to toggle between a 12 or 24 hour clock. Press [MODE]
to save.
3) Press [SELECT] to toggle between AM (A) or PM (P). Press [MODE] to
save.
4) Press [SELECT] to toggle through digit values to set hours in time of
day. Press [MODE] to save.
24
Std
t
12
Std
t
Std
p
t
12:00
p
Set
E
1 2 3 4 5
t
d