Troubleshooting, Maintenance – JKS 4100 User Manual

Page 4

JKS4100

JKS Quicker Disconnect Installation

4 Page

8. LUBRICATE QUICKER DISCONNECTS

Lubricate all Grease Zerk fittings (E) on the Quick-

er Disconnects immediately after installation using

common wheel bearing grease or equivalent.

Troubleshooting

If swaybar does not rotate freely, remove from vehicle,

clean and apply rubber lubricant to chassis-mounted bush-

ings, and reinstall.

Maintenance

It is important to lubricate Quicker Disconnects frequently

for the first three (3) months after installation to evacuate

contaminants that may build up during break-in period.
After break-in period, Quicker Disconnects should be lubri-

cated regularly as part of vehicle maintenance schedule.
Regular cleaning with pressurized water is recommended

to maximize ease of operation and reliability. Always lubri-

cate afterwards to evacuate any moisture.

Revision Date 10/11/2013