JKS 4100 - Manual

JKS4100 JKS Quicker Disconnect Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Quicker Disconnects™
Part Number: JKS4100
Welcome
CONGRATULATIONS on purchasing a set of new Quicker
Disconnects™ from JKS Manufacturing. We are committed
to providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
NOT COMPATIBLE WITH aftermarket swaybars. Install
product with Original Equipment swaybar only.
SOME VEHICLES MAY REQUIRE extended front brake
hoses or other modifications to compensate for ad-
ditional suspension travel.
NEVER DISCONNECT swaybar when operating vehicle
on public roads.
WHEN DISCONNECTED, the Quicker Disconnects
must be completely removed from the vehicle and the
swaybar must be secured to prevent interference with
other suspension components or axle.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 15/16” Open-End Wrench
 #1 Philips Screwdriver or Small Punch
 Medium Strength Threadlocker
 Angle Measuring Tool
 Welder
 Paint Removal Tool
 Black Spray Paint
 Grease Gun with Zerk Fitting Coupler
 Wheel Bearing Grease
Parts
Description
A 1/2” x 1-3/8” NF GR5 Bolt
B Spherical Bushing
C Upper Stainless Steel Post
D Click Pin
E Press-In Grease Zerk
F Grease Zerk Cap
G Upper Male Threaded End
H Lower Female Threaded End
I 1/2” Lock Washer
J Weld-on Tab
K 1/2” NF Nylock Nut
L Lower Stainless Steel Post
M 5/8” Jam Nut
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036