Attention installer, Operation, Maintenance – JKS 2210 User Manual

Page 5

JKS2210

JKS Adjustable Coil Spacer Installation

Page 5

ATTENTION INSTALLER

IMPORTANT NOTE REGARDING

SHOCK ABSORBERS

To prevent the coil springs from becoming

unseated during maximum suspension

extension, correct length shock absorbers

must be installed.

Operation

Ride Height Adjustments

Future ride height adjustments should be made
with

NO LOAD on the front coil springs, and the suspen-

sion at

FULL DROOP.

NEVER TURN Adjuster Ring (B) while under tension
and

ALWAYS APPLY SPRAY LUBRICANT to Threaded

Tube (A) before adjusting.

Maintenance

Regular cleaning with pressurized water is recommended

to maximize ease of operation and reliability.
In addition, the Bump Stop Adapter (E) has two 1/8” drain-

age holes that evacuate any water collected inside the

upper spring retainer. Periodically check for blockages and

clear the drainage holes if necessary.

Revision Date 5/15/2014