Ag Leader InSight SC Seed Tube Monitor (STMM) - Manual (Page 14)

Part No. 2002831-47 Rev. B 14
Section 11: Seed Tube Sensor
Selection
If you specified a split-row planting configuration in the drop-down list shown on
the Seed Monitor Setup window (See “Seed Tube Monitor Module Setup” on Section 9,
page 11), then the Selection window will appear (as shown below) after the first time that
you press the Sensor Configuration button on the Seed Monitor Setup window. Choose
between Standard Row or Split Row, and press OK.
Note: Split-row users must configure the Seed Tube Monitor Module for both
Standard Row configurations and Split Row Configurations. Both configurations are then
saved in the module, and settings for each planting configuration are automatically
applied when you specify the machine configuration on the Run Screen.
Seed Monitor Setup: Selection