Ag Leader InSight SC Seed Tube Monitor (STMM) - Manual (Page 13)

Part No. 2002831-47 Rev. B 13
Section 10: Seed Tube Sensor
Configuration
The Sensor Configuration window shows which rows are assigned to the
individual pins on the Seed Tube Monitor Module.
Seed Tube Sensor Configuration
The numeric keypad to move the sensor to a different location, in case
you need to make configuration changes for custom planting operations.
Note: To return to the default, press the AutoConfig button.
The Status button enables and disables a Seed Tube sensor.
Note: A row with a failed sensor can be ignored until a replacement
sensor is installed.
The AutoConfig button sends the planter settings to the Seed Tube
Monitor Module.
Note: After creating a Seed Tube Monitor Module configuration, in order
for it to become active you must perform an AutoConfig procedure.
The Remove button removes an individual Seed Tube sensor.
The row spacing keypad is where you must enter in the row spacing that
your planter will use during planting operations.