HP LaserJet M2727 Multifunction Printer series - Manual (Page 88)

Restore the copy-settings defaults
Use the control panel to restore the copy settings to the factory-set default values.
1. On the product control panel, press Setup .
2. Use the arrow buttons to select Copy setup , and then press OK .
3. Use the arrow buttons to select Restore defaults, and then press OK .
Copy a book
1. Lift the lid and place the book on the flatbed scanner with the page that you want to copy at the
lower-right corner of the glass.
2. Gently close the lid.
3. Gently press down on the lid to press the book to the flatbed scanner surface.
CAUTION: Pressing on the flatbed cover with too much force can break the lid hinges.
4. Press Start Copy .
Copy photos
76 Chapter 8 Copy ENWW