HP LaserJet M2727 Multifunction Printer series - Manual (Page 27)

Menu Item Sub-menu item Sub-menu item Description
Fax Send setup Def. Resolution Fine
Superfine
Photo
Standard
Sets the resolution for sent documents. Higher resolution
images have more dots per inch (dpi), so they show more
detail. Lower resolution images have fewer dots per inch and
show less detail, but the file size is smaller.
Def. light/dark Sets the darkness of outgoing faxes.
Def. glass size Letter
A4
Sets the default paper size for documents being scanned
from the flatbed scanner.
Dialing Mode Tone
Pulse
Sets whether the product should use tone or pulse dialing.
Redial if busy On
Off
Sets whether or not the product should attempt to redial if
the line is busy.
Redial-no answer On
Off
Sets whether the product should attempt to dial if the
recipient fax number does not answer.
Redial Comm Err. On
Off
Sets whether the product should attempt to redial the
recipient fax number if a communication error occurs.
Dial Prefix On
Off
Specifies a prefix number that must be dialed when sending
faxes from the product.
Detect dial tone On
Off
Sets whether the product should check for a dial tone before
sending a fax.
Billing codes On
Off
Enables the use of billing codes when set to On. A prompt
will appear that asks you to enter the billing code for an
outgoing fax.
Table 2-5 Fax setup menu (continued)
ENWW Control-panel menus 15