Scan-quality problems, Prevent scan-quality problems, Solve scan-quality problems – HP LaserJet M2727 Multifunction Printer series User Manual
Page 215: Fax problems
Scan-quality problems
Prevent scan-quality problems
The following are a few simple steps you can take to improve copy and scan quality.
●
Use the flatbed scanner, rather than the automatic document feeder (ADF) input tray, to scan.
●
Use high-quality originals.
●
Load the media correctly. If the media is loaded incorrectly, it might skew, which causes unclear
images. See
Load paper and print media on page 49
for instructions.
●
Adjust the software settings according to how you plan to use the scanned page. See
resolution and color on page 87
for more information.
●
If your product frequently feeds more than one page at a time, the separation pad might need to
be replaced. Contact HP. Se
or the support flyer that came in the
product box.
●
Use or make a carrier sheet to protect your originals.
Solve scan-quality problems
Problem
Cause
Solution
Blank pages
The original might have been loaded upside
down.
In the automatic document feeder (ADF), put
the top end of the stack of originals into the
ADF input tray, with the media stack face-up
and the first page to be scanned on top of
the stack.
On the flatbed scanner, place the original
document face-down with the upper-left
corner of the document at the lower-right
corner of the glass.
Too light or dark
The resolution and color levels may be set
incorrectly.
Verify that you have the correct resolution
and color settings. See
Unwanted lines
Ink, glue, correction fluid, or an unwanted
substance might be on the glass.
Clean the flatbed scanner surface. See
Clean the scanner glass on page 88
The ADF glass might be dirty.
Clean the scanner strip. See
(step 3).
Black dots or streaks
Ink, glue, correction fluid, or an unwanted
substance might be on the glass.
Clean the flatbed scanner surface. See
Clean the scanner glass on page 88
The power to the product might have
fluctuated.
Reprint the job.
Unclear text
The resolution levels might be set
incorrectly.
Verify that the correct resolution settings are
correct. See
Fax problems
To solve fax issues, see
Solve fax problems on page 129
ENWW
Solve image-quality problems 203