HP LaserJet M2727 Multifunction Printer series - Manual (Page 125)

4. Click Fax Tasks.
5. Under Fax Receive Mode, select Receive faxes to this computer.
Turn off the receive-to-PC setting from the control panel
The receive-to-PC setting can be activated only from one computer. If for any reason that computer is
no longer available, you can use the following procedure to turn the receive-to-PC setting off from the
control panel.
1. On the control panel, press Setup .
2. Use the arrow buttons to select Fax functions, and then press OK .
3. Use the arrow buttons to select Stop Recv to PC, and then press OK .
Use autoreduction for incoming faxes
If the fit-to-page option is turned on, the product automatically reduces long faxes up to 75% to fit the
information on the default paper size (for example, the fax is reduced from legal to letter size).
If the fit-to-page option is turned off, long faxes print at full size on multiple pages. The factory-set default
for incoming fax autoreduction is On.
If you have the stamp-received faxes option turned on, you might also want to turn on autoreduction.
This reduces the size of the incoming faxes slightly, and prevents the page-stamp from forcing a fax
onto two pages.
NOTE: Make sure that the default media size setting matches the size of the media that is loaded in
the tray.
1. On the control panel, press Setup .
2. Use the arrow buttons to select Fax setup, and then press OK .
3. Use the arrow buttons to select Fax Recv. setup, and then press OK .
4. Use the arrow buttons to select Fit to page, and then press OK .
5. Use the arrow buttons to select On or Off, and then press OK to save the selection.
Set the silence-detect mode
This setting controls whether or not you can receive faxes from older-model fax machines that do not
emit a fax signal during fax transmissions. At the time of this publication, these silent-model fax machines
represented very few of the fax machines in use. The default setting is Off. The silence-detect mode
setting should be changed only if you regularly receive faxes from someone who uses an older-model
fax machine.
1. On the control panel, press Setup .
2. Use the arrow buttons to select Fax setup, and then press OK .
3. Use the arrow buttons to select Fax Recv. setup, and then press OK .
4. Use the arrow buttons to select Silence Detect, and then press OK .
5. Use the arrow buttons to select On or Off, and then press OK to save the selection.
ENWW Change fax settings 113