HP Insight Management Agents - Manual (Page 131)

– Synch DRAM (Synchronous DRAM)
– Unknown
System Resources
•
This section lists the resources in use by the device or client workstation in the following order:
•
IRQ Numbers—The Interrupt Request number displays, followed by the slot number of the
board that is using this interrupt.
•
Port Address—The port address range displays, followed by the slot number of the board that
is using this I/O port range.
•
DMA Channels—The DMA channel displays, followed by the slot number of the board that
is using this channel.
•
Memory—The memory range displays, followed by the slot number of the board that is using
this memory.
NOTE: A slot number of "system" in the device, or “embedded” in the client workstation, refers
to slot zero.
System Summary
HP System Insight Manager automatically collects configuration information for all devices in the
Responsible Device List. This information is used by filtering subsystems, which allow you to filter
your devices on such things as processor type or network operating system. The type of information
collected during Configuration Data Collection is useful for asset management.
The following System Information is displayed. Information varies depending on the device type:
•
General Information
•
Product name displays the type of device or client PC.
•
Operating system displays the type of operating system installed on the device.
•
Server Role displays a free form text field intended for briefly describing the system's function
if available.
•
SMBIOS Version displays the version of SMBIOS on the device if applicable and available.
•
Machine ID (System Board) displays the identification number of the machine.
•
Type of expansion bus identifies the device or client bus type as EISA, EISA/PCI, PCI, PCI-X
or PCI-Express.
•
Description Information.
•
System Name displays the name of the device.
•
Description displays a description of the device, including hardware and software.
•
Network Management Up Time displays the amount of time since the network management
portion of the system was last reinitialized.
•
Contact Information displays the name of the person to contact about this device.
•
Location displays the physical location of the device.
•
IP Address displays the network location of the device.
•
Power Management
•
This section displays the state of power management on the system (enabled or disabled).
•
Asset Control Information
Sub-system Classification 131