HP Insight Management Agents - Manual (Page 44)

◦ 6.0 Gbps—The negotiated link rate for this drive is 6.0 gigabits per second.
◦ Unknown—The agent is unable to determine the negotiated link rate for this drive.
•
NCQ Support—Displays the status of Native Command Queuing support for this drive. The
possible values are:
◦ No Controller Support—The array controller does not support NCQ.
◦ No Drive Support—The array controller does support NCQ, but the drive does not.
◦ Disabled—The array controller and drive support NCQ, but it is disabled.
◦ Enabled—The array controller and drive support NCQ and it is enabled.
◦ Unknown—The agent is unable to determine the NCQ configuration for this drive or it
is not a SATA drive.
•
Phy Count—Displays the number of phys for each physical drive. Single-ported drives have
one phy. Dual-ported drives have two phys.
•
Multipath Status—Displays the overall multipath status of this physical drive. The following
values are valid:
◦ Not Configured—Indicates that the physical drive is not configured to have multipath
access.
◦ Redundant—Indicates that the physical drive currently has more than one I/O path to
the controller.
◦ Not Redundant—Indicates that the physical drive previously had more than one I/O path
to the controller but now has no redundant I/O path.
◦ Disk Failed—Indicates that the physical drive has failed.
Paths
For multipath-capable hardware, the status and role of each data path to the physical drive is
reported.
•
Path—Indicates the path to the physical drive. Each path is identified by a descriptor, for
example "Port 2E Box 1 Bay 12" indicates a path from the host adapter external port number
2 ("Port 2E") to the 12th bay in the first box.
•
Status—Indicates the status of the data path. Possible values are:
OK—The path is operational. ◦
◦ Link down—The path is not operational.
◦ Unknown—The path status cannot be determined.
•
Role—Indicates the role of this path in the configuration. Possible values are:
Active—This path is the preferred data path to the physical drive. ◦
◦ Alternate—This path is the alternate data path to the physical drive.
◦ Unknown—The role of this path cannot be determined.
SmartSSD Wear Gauge
For supported solid state disk drives, the following SSD usage statistics of the physical drive are
reported.
•
SmartSSD Usage Remaining—Displays the percentage of life remaining for this solid state
disk.
•
Estimated Life Remaining based on workload to date—Indicates the estimated total number
of days that the this solid state disk has remaining based on the current write workload.
44 Agent information