HP Insight Management Agents - Manual (Page 126)

Security
The Security section displays each of the following security parameters as either Enabled or Disabled
for the selected device:
•
Serial Port Control—Prevents the transfer of data through the integrated serial interface (COM
ports).
•
Parallel Port Control—Prevents the transfer of data through the integrated parallel port.
•
USB Port Control—Prevents the transfer of data through the integrated universal serial bus
(USB) port.
•
Floppy Disk Control—Prevents writing to the diskette drives and allows read only access.
Software Version Information –
This section displays the versions of the system software installed on this machine.
•
Name—The name of the software installed in the system is displayed.
•
Installed Version—The version of the software installed in the system is displayed
System Board
The following information about the system board is displayed. The type of information displayed
may vary depending on the device type.
•
Product Name—Displays the type of device or client PC.
•
System ROM Version—Identifies the current system ROM version by date. This information
may help you track the configuration of the device or client and may be useful for diagnosing
service problems. If your system is a ProLiant computer, other information such as the Family
Code and Type Code is given.
•
Redundant ROM Version—Identifies the backup system ROM version by date. This field is not
displayed if a Redundant ROM is not available.
•
Remote ROM-based Diagnostics—Displays the date of the current Remote ROM-based
Diagnostics for this device. This field shows NA if Remote ROM-based Diagnostics are not
present.
•
Hours in Service—Displays the number of hours the operating system has been running on
this device since the operating system software was installed.
•
Serial Number—Displays the Physical serial number of the device or client system board. Use
this number for identification and registration purposes. N/A appears if you do not have a
device or client that supports the asset management feature. Use the System Configuration
Utility (or the appropriate utility for your device or client) to enter a system serial number if
one does not appear and you have a device or client that supports the asset management
feature.
•
Virtual Serial Number—Displays the Logical serial number of the device or client system board.
This field won't be available if you do not have a device that supports this feature.
•
Bus Type—Identifies the device or client bus type as EISA, EISA/PCI, PCI, PCI-X or PCI Express.
•
Board Rev—Displays the system board revision number.
126 Agent information