HP Insight Management Agents - Manual (Page 112)

◦ Unlock Error—The board or cartridge is unlocked when it should not be. Be sure that the
board of cartridge is locked.
◦ Configuration Error—The board or cartridge has a bad memory configuration. Be sure
that all memory modules are of the correct type, speed, latency, etc.
◦ Bus Error—The board or cartridge has a memory bus error. Please insure all memory
modules are of the correct type, speed, latency, etc. Be sure that the cartridge is inserted
properly.
◦ Power Error—The board or cartridge has power error. Please insure all memory modules
are of the correct type, speed, latency, etc. Also insure the cartridge is inserted properly.
◦ Advanced ECC—The board or cartridge is configured for advanced ECC mode.
◦ Online Spare—The board or cartridge is configured for Online Spare mode.
◦ Mirrored—The board or cartridge is configured for mirrored mode.
◦ Uncorrectable Memory Error—The board or cartridge has a mirrored/RAID DIMM error.
◦ Memory RAID—The board or cartridge is configured for memory RAID mode.
◦ LockStep—The board or cartridge is configured for LockStep mode.
◦ Uncorrectable LockStep Memory Error—The board or cartridge has a LockStep DIMM
error.
◦ Present—This value specifies existence of the board or cartridge or riser in the Slot/CPU
number.
◦ Locked—This value specifies whether the board or cartridge or riser is locked or not.
◦ Hot Plug—This value specifies whether the board or cartridge or riser is hot pluggable
or not.
◦ Total Memory—This value specifies the size of memory for this board or cartridge or riser,
including memory seen by the OS and the memory used for spare, mirrored, RAID-XOR,
or LockStep configurations.
◦ In Use by OS—This value specifies the size of memory for this board or cartridge or riser
as seen by the OS.
Memory Details
•
Condition—Displays the condition of the memory module.
•
Socket—Displays the socket number of memory module.
•
Status—Displays the status of memory module whether in use or not.
•
Type—Displays the type of memory installed.
•
Other—Memory type can not be determined.
•
Board—The value determine the memory module is permanently mounted (not modular) on a
system board or memory expansion board.
◦ CPQ Single Width Module
◦ CPQ Double Width Module
◦ SIMM
◦ PCMCIA
◦ Compaq Specific
◦ DIMM
◦ Small Outline DIMM
112 Agent information