HP ProLiant DL580 G3 Server - Manual (Page 95)

95
Memory options
In this section
Memory overview......................................................................................................................... 95
Advanced ECC memory ............................................................................................................... 97
Online spare memory.................................................................................................................... 99
Hot-plug mirrored memory ........................................................................................................ 100
Hot-plug RAID memory............................................................................................................. 102
Memory Boards and DIMMs ..................................................................................................... 103
Configuring the memory ............................................................................................................ 111
Memory overview
This server supports up to four memory boards. Each memory board contains
four DIMM slots for a total of 16 DIMM slots in the server. Memory can be
expanded by installing PC2-3200R Registered DDR2 DRAM DIMMs.
The server supports a host of AMP options to optimize server availability:
• Advanced ECC ("Advanced ECC memory" on page
97 )
• Online spare memory (on page
99 )
• Hot-plug mirrored memory (dual- and quad-board) ("Hot-plug mirrored
memory" on page 100 )
• Hot-plug RAID memory
Hot-plug operations can be hot-add or hot-replace. Hot-add makes additional
memory resources available to the operating system. Hot-replace allows failed or
degraded DIMMs to be replaced while the server is running.
The maximum supported total memory for this server is 64 GB using four
memory boards. The maximum supported memory per memory board is 16 GB
using four 4-GB DIMMs.