Riloe ii cabling, Hot-plug scsi drive cabling, Le ("riloe ii cabling" on – HP ProLiant DL580 G3 Server User Manual

Page 117

Server cabling

117

RILOE II cabling

The 30-pin Remote Insight cable ships with the RILOE II cable kit.

CAUTION: When routing cables, always be sure that the cables

are not in a position where they can be pinched or crimped.

IMPORTANT: Install the RILOE II board into slot 7 for ease of

cabling.

Hot-plug SCSI drive cabling

CAUTION: When routing cables, always be sure that the cables

are not in a position where they can be pinched or crimped.

The following are the standard SCSI cabling configurations for this server:

•

Single-channel (simplex mode) SCSI cabling to the SCSI ports

•

Dual-channel (duplex mode) SCSI cabling to the SCSI ports

•

Standard SCSI cabling to an expansion board

NOTE: The server ships with the required cables.